debug exception-info

This command displays debug information about exceptions.

Syntax

# debug exception-info 

Command	Description
<Exception Number>	Displays debug information of a specified exception number.

Command Mode

Privileged User

Example

This example shows how to display debug information related to exception 1:

# debug exception-info 1
There are 10 Exceptions
Exception Info of Exception 1:
Trap Message - Force system crash(0) due to HW Watchdog
Board Was Crashed: Signal 0, Task
BOARD MAC : 00908F5B1035
EXCEPTION TIME : 0.0.0 0.0.0
VERSION: Time 13.5.25, Date 16.12.16, major 720, minor 90, fix 485 Cmp Name:ramESBC_SIP Board Type:77
RELATED DUMP FILE : core_E-SBC_ver_720-90-485_bid_5b1035-177_SIP
ZERO:00000000 AT:00000000 V0:00000000 V1:00000000 A0:00000000 A1:00000000 A2:00000000 A3:00000000
T0:00000000 T1:00000000 T2:00000000 T3:00000000 T4:00000000 T5:00000000 T6:00000000 T7:00000000
S0:00000000 S1:00000000 S2:00000000 S3:00000000 S4:00000000 S5:00000000 S6:00000000 S7:00000000
T8:00000000 T9:00000000 K0:00000000 K1:00000000 GP:00000000 SP:00000000 FP:00000000
stack_t - ss_sp:00000000 ss_size:00000000 ss_flags:00000000
PC:00000000                     +0
RA:00000000                     +0